RISC-V · Robotics · Motor Control

MIPS Actus: Two RISC-V MCUs and a TSN Switch Inside the Robot Joint

📅 2026-11-10 ⏱ 9 min read 🔗 Source: MIPS press release, “MIPS Unveils Actus Platform for Precise, Secure Robotic Motion Control”, Santa Clara, 9 November 2026

A humanoid arm has one hard boundary: from the elbow to the fingertips, every joint has to produce smooth, humanlike motion inside strict limits on space, weight, power and heat — while talking to the rest of the arm over a network that must not jitter. On 9 November 2026, at electronica 2026 in Munich, MIPS, by GlobalFoundries, introduced advances to its Actus reference platform aimed squarely at that boundary: a single-chip joint controller that combines deterministic motor control, in-robot networking and edge inference, with two Atlas M8500 real-time RISC-V microcontrollers at its core.

The structural story: this is the same MIPS that supplies the CPU IP behind Infineon’s RISC-V AURIX RC1 automotive platform (which we covered on 8 November). Now the foundry that owns MIPS is fielding its own platform line on that IP — meaning GlobalFoundries is simultaneously a RISC-V IP vendor to chipmakers and a platform vendor to robot makers, with one open ISA base across both.

What Actus Is

Actus is a reference platform, not a chip announcement in the usual sense: it is a defined combination of processors, accelerators, I/O and manufacturing technology that MIPS documents so that robot makers can build joint actuators on it. The company positions it as the third leg of a “Physical AI” portfolio alongside Acies (an inference-native AI platform) and Aegis (a safety-native CPU platform).

FunctionWhat MIPS says Actus provides
Real-time control Two Atlas M8500 real-time RISC-V microcontrollers; hardware multithreading removes context-switch penalties during interrupt service
Motor control 100-picosecond-class high-resolution PWM plus sigma-delta ADCs for high-torque, high-current motors; dedicated trigonometric acceleration delivering >16× standard trigonometric libraries on field-oriented control (FOC) algorithms
Edge inference ARC VPX 512-bit vector processing so sensor fusion and predictive-maintenance models run on the same chip that drives the motor
Networking Gigabit Ethernet with three-port TSN, CAN-FD and serial interfaces for deterministic joint-to-controller coordination
Security & safety Hardware security module with post-quantum cryptography; functional-safety support for production robotics
Manufacturing GlobalFoundries FDX FD-SOI with AutoPro150 and on-chip MRAM

The Control Half: Threads, Trig and Timing

Two design choices carry the real-time story. First, hardware multithreading: when an interrupt arrives — a current-sample deadline, a TSN frame, an encoder edge — the M8500 switches hardware contexts instead of spilling and restoring a software context, so the interrupt service does not pay the register-save tax that software context switching charges. For a control loop that must not miss its deadline, that is the difference between a jitter budget you can defend and one you cannot.

Second, dedicated trigonometric acceleration. Field-oriented control needs sin/cos and inverse transforms on every current cycle; running them on standard software libraries is a measurable tax at high PWM frequencies. MIPS rates the acceleration at more than 16× the performance of standard trigonometric libraries on FOC algorithms. Combined with 100-picosecond-class PWM resolution and sigma-delta ADCs, the platform claims the precision needed for high-torque, high-current motors in compact joints.

Honesty check: both headline numbers — 16× and “100-picosecond-class” — are vendor-stated figures from a press release with no independent benchmark, no clock frequency, and no power figure behind them. Treat them as design targets to be validated on the Actus-1 evaluation board, not as measured results.

The Network Half: TSN in the Joint

The less glamorous half is what makes a robot a robot rather than a bag of independent motors: joints must exchange position and torque data with the central controller over a deterministic network. Actus integrates gigabit Ethernet with a three-port Time-Sensitive Networking switch plus CAN-FD and serial links, so a joint controller can forward traffic between its neighbors and the trunk — the wiring harness of a humanoid is, in effect, a TSN network daisy-chained through its joints.

Each node gets an integrated hardware security module with post-quantum cryptography, and the platform carries functional-safety support — both prerequisites for robots moving from demo cells into production floors, where identity, attestation and certified failure behavior stop being optional. MIPS CEO Sameer Wasson framed it as closing the gap between AI decisions and physical action; Omdia’s Edward Wilford called single-chip real-time control plus deterministic networking “a clear gap in the market.”

Where It Sits: The MIPS-by-GF Physical AI Stack

PlatformRoleEmphasis
ActusRobot joint reference platform Deterministic motor control + TSN networking + edge inference in the actuator
AciesInference-native AI platform Running AI models where the data is produced
AegisSafety-native CPU platform Safety-critical compute with certification path

The three share what MIPS describes as one open RISC-V technology base — with one significant exception spelled out below. Manufacturing is GlobalFoundries’ FDX FD-SOI with AutoPro150 and on-chip MRAM. FD-SOI matters for joints for unglamorous reasons: body biasing gives fine-grained power-performance trade-offs, MRAM removes a flash process module, and both shrink board area in a volume that has to fit inside an actuator housing.

Availability

Software teams can start on a virtual platform before silicon arrives, then move to the Actus-1 evaluation board and SDK for prototypes. Green Hills Software is named as an ecosystem partner for safety-certified software stacks. MIPS is demonstrating Actus at electronica 2026 in Munich, 10–13 November, Hall C3, Booth 540, and presents “Utilizing the RISC-V Architecture to Accelerate Real-Time Applications” at the Embedded Developer Forum on 12 November.

What the Announcement Does Not Say

CategoryStatus in the 9 November announcement
Core frequency, power, area, priceNot published — no PPA numbers for the M8500 pair or the platform at all
ISA string / profile of the M8500Not published — described only as a real-time RISC-V MCU
Silicon datesNot given — virtual platform today, Actus-1 board “to move to”, no shipment window
Independent benchmarks for 16× trig / 100 ps PWMNone — vendor figures only
Vector engine ISANot RISC-V — ARC VPX is MIPS-owned DSP IP
The fine print on “one open RISC-V technology base”: the edge-inference engine, ARC VPX, is a 512-bit vector DSP family that came to MIPS with its acquisition of Synopsys’ ARC processor line — it is not a RISC-V core and does not execute the RISC-V vector or matrix extensions. The RISC-V claim applies to the M8500 microcontrollers and the CPU side of the portfolio; the vector datapath is a separate, proprietary IP block on the same die.

Why It Matters

Two reasons to keep this on the radar. First, humanoid robotics is pulling embedded real-time control toward the same consolidation the automotive world went through — and the AURIX RC1 story showed where the qualification effort is; Actus is the robotics-side echo, with TSN instead of CAN-XL as the deterministic fabric. Second, the supplier structure is unusual: a foundry now owns a CPU IP house, licenses that IP to Infineon for automotive, and builds its own robotics platforms on it. If RISC-V’s next phase really is “value moving from the ISA to differentiated products”, the MIPS-by-GF arrangement is one of the clearest live experiments in that thesis — on an open ISA base that still lets a robot maker audit what is underneath.

摘要(中文),2026 年 11 月 9 日,GlobalFoundries 旗下的 MIPS 在慕尼黑 electronica 2026 上发布 Actus 参考平台的最新进展:面向紧凑型机器人关节,把确定性电机控制、机器人内网络与边缘推理 集成到单芯片方案中,核心是两颗 Atlas M8500 实时 RISC-V 微控制器。

控制侧的两个关键设计:硬件多线程消除中断服务中的上下文切换开销;专用三角函数加速 在磁场定向控制(FOC)算法上较标准三角函数库快 16 倍以上(厂商口径)。配合 100 皮秒级高分辨率 PWM 与 sigma-delta ADC,支撑大扭矩、大电流电机的精确控制。

网络侧:三端口 TSN 千兆以太网 + CAN-FD + 串口,让各关节通过确定性网络交换位置与力矩数据;每个节点 集成带后量子密码的硬件安全模块,并支持功能安全。制造基于 GF FDX FD-SOI、AutoPro150 与片上 MRAM。软件侧可先在虚拟平台开发,后续转向 Actus-1 评估板与 SDK;Green Hills Software 支持 安全认证软件栈。MIPS 在 electronica 2026(11 月 10–13 日,C3 馆 540 展位)现场演示。

诚实点:这是参考平台而非已出货硅片——主频、功耗、面积、价格与 M8500 的 ISA 字符串 均未公布,16× 与 100ps 均为厂商口径、无独立基准;ARC VPX 512 位向量引擎来自 MIPS 收购的 Synopsys ARC DSP 产品线,并非 RISC-V。结构看点:GF 同时是向英飞凌 AURIX RC1 供给 MIPS RISC-V 核 IP 的授权方,又是自建机器人平台的平台厂商——一条开放 ISA 底座,两条产品路线。

Резюме (RU). 9 ноября 2026 года MIPS (принадлежит GlobalFoundries) представила на electronica 2026 в Мюнхене обновление референс-платформы Actus для компактных суставов роботов: детерминированное управление двигателями, внутрителесная сеть и edge-инференс на одном чипе. Ядро — два микроконтроллера Atlas M8500 с реальным временем на базе RISC-V.

Аппаратная многопоточность убирает издержки переключения контекста в обработчиках прерываний; ускорение тригонометрии даёт, по данным MIPS, более 16× к стандартным библиотекам в алгоритмах FOC; ШИМ класса 100 пикосекунд и сигма-дельта АЦП обеспечивают точное управление мощными двигателями. Сеть: гигабитный Ethernet с трёхпортовым TSN и CAN-FD; в каждом узле аппаратный модуль безопасности с постквантовой криптографией; заявлена поддержка функциональной безопасности. Техпроцесс — GF FDX FD-SOI с MRAM на кристалле.

Честно: это референс-платформа, а не готовый кремний — частоты, энергопотребление, цена и ISA-строка не опубликованы; цифры 16× и 100 ps — заявления вендора без независимых замеров. Векторный движок ARC VPX — DSP-IP, унаследованный от Synopsys, а не RISC-V. Разработку можно начинать на виртуальной платформе, затем — плата Actus-1 и SDK; партнёр по сертифицированному ПО — Green Hills Software.

Resumen (ES). El 9 de noviembre de 2026, MIPS (propiedad de GlobalFoundries) presentó en electronica 2026 (Múnich) avances de su plataforma de referencia Actus para articulaciones de robot compactas: control de motor determinista, red interna del robot e inferencia en el borde en un solo chip, con dos microcontroladores Atlas M8500 RISC-V de tiempo real como núcleo.

El multihilo por hardware elimina la penalización de cambio de contexto en las interrupciones; la aceleración trigonométrica dedicada rinde, según MIPS, más de 16× frente a las librerías estándar en control orientado a campo (FOC); un PWM de clase 100 picosegundos y ADC sigma-delta sostienen el control preciso de motores de alto par. Las articulaciones se coordinan por gigabit Ethernet con TSN de tres puertos y CAN-FD; cada nodo integra un módulo de seguridad hardware con criptografía post-cuántica, con soporte de seguridad funcional. Fabricación en GF FDX FD-SOI con MRAM embebida. El desarrollo empieza en una plataforma virtual y sigue con la tarjeta de evaluación Actus-1 y su SDK; Green Hills Software da soporte a pilas certificadas.

Advertencia honesta: es una plataforma de referencia, no silicio enviado: no hay frecuencias, consumo, precio ni cadena ISA publicados, y las cifras 16× y 100 ps son declaraciones del fabricante sin benchmark independiente. El motor vectorial ARC VPX es IP DSP (línea ARC de Synopsys), no RISC-V.

Résumé (FR). Le 9 novembre 2026, MIPS (détenue par GlobalFoundries) a présenté à electronica 2026 à Munich les évolutions de sa plateforme de référence Actus pour les articulations de robots compactes : commande moteur déterministe, réseau interne au robot et inférence en périphérie sur une seule puce, autour de deux microcontrôleurs Atlas M8500 RISC-V temps réel.

Le multithreading matériel supprime le coût de commutation de contexte dans les interruptions ; l’accélérateur trigonométrique offre, selon MIPS, plus de 16× les bibliothèques logicielles standards sur les algorithmes FOC ; un PWM de classe 100 picosecondes et des ADC sigma-delta visent le contrôle précis de moteurs à fort couple. Les articulations communiquent via Ethernet gigabit avec TSN à trois ports et CAN-FD ; chaque nœud intègre un module de sécurité matérielle à cryptographie post-quantique, avec support de la sécurité fonctionnelle. Fabrication en GF FDX FD-SOI avec MRAM embarquée. Le développement logiciel démarre sur plateforme virtuelle, puis bascule sur la carte d’évaluation Actus-1 et son SDK ; Green Hills Software accompagne les piles logicielles certifiées.

Avertissement : c’est une plateforme de référence, pas un silicium expédié — aucune fréquence, consommation, prix ni chaîne ISA publiés ; les chiffres 16× et 100 ps sont des affirmations du fournisseur sans benchmark indépendant. Le moteur vectoriel ARC VPX est une IP DSP (ligne ARC de Synopsys), pas du RISC-V.

Zusammenfassung (DE). Am 9. November 2026 stellte MIPS (im Besitz von GlobalFoundries) auf der electronica 2026 in München den weiterentwickelten Actus-Referenzplattform für kompakte Robotergelenke vor: deterministische Motorsteuerung, roboterinternes Netzwerk und Edge-Inferenz auf einem Chip, mit zwei Atlas-M8500-Echtzeit-Mikrocontrollern auf RISC-V-Basis als Kern.

Hardware-Multithreading eliminiert den Kontextwechsel-Overhead in Interrupt-Routinen; die dedizierte Trigonometrie-Beschleunigung erreicht laut MIPS mehr als das 16-fache Standardbibliotheken bei Feldorientierter Regelung (FOC); ein PWM der Klasse 100 Pikosekunden und Sigma-Delta-ADCs zielen auf die präzise Ansteuerung hochmomentiger Motoren. Die Gelenke koordinieren sich über Gigabit-Ethernet mit Drei-Port-TSN und CAN-FD; jeder Knoten integriert ein Hardware-Sicherheitsmodul mit Post-Quanten-Kryptografie, dazu Functional-Safety-Unterstützung. Gefertigt wird auf GF FDX FD-SOI mit On-Chip-MRAM. Die Softwareentwicklung beginnt auf einer virtuellen Plattform, danach folgen Actus-1-Evaluierungsboard und SDK; Green Hills Software unterstützt zertifizierte Softwarestacks.

Ehrlicher Hinweis: Es ist eine Referenzplattform, kein ausgelieferter Chip — keine Taktraten, Leistungswerte, Preise oder ISA-Strings veröffentlicht; die Werte 16× und 100 ps sind Herstellerangaben ohne unabhängiges Benchmark. Die Vektoreinheit ARC VPX ist DSP-IP (ARC-Linie von Synopsys), kein RISC-V.

خلاصه (فارسی). در ۹ نوامبر ۲۰۲۶، شرکت MIPS (متعلق به GlobalFoundries) در نمایشگاه electronica 2026 مونیخ، پیشرفت‌های پلتفرم مرجع Actus را برای مفصل‌های ربات‌های فشرده معرفی کرد: کنترل قطعی موتور، شبکه درون‌رباتی و استنتاج لبه روی یک تراشه، با هستهٔ دو میکروکنترلر Atlas M8500 بی‌درنگ مبتنی بر RISC-V.

چندنخی سخت‌افزاری هزینهٔ تعویض زمینه را در روتین‌های وقفه حذف می‌کند؛ شتاب‌دهندهٔ اختصاصی توابع مثلثاتی بنا بر ادعای MIPS بیش از ۱۶ برابر کتابخانه‌های نرم‌افزاری استاندارد در الگوریتم‌های FOC عمل می‌کند؛ PWM کلاس ۱۰۰ پیکوثانیه و مبدل‌های سیگما-دلتا برای کنترل دقیق موتورهای گشتاور بالا در نظر گرفته شده‌اند. مفصل‌ها از طریق اترنت گیگابیتی با TSN سه‌پورته و CAN-FD داده جابه‌جا می‌کنند؛ هر گره ماژول امنیتی سخت‌افزاری با رمزنگاری پساکوانتومی دارد و پشتیبانی ایمنی کارکردی نیز ادعا شده است. ساخت روی GF FDX FD-SOI با MRAM روی تراشه است. توسعهٔ نرم‌افزار از پلتفرم مجازی آغاز و بعد به برد ارزیابی Actus-1 و SDK منتقل می‌شود؛ Green Hills Software پشته‌های نرم‌افزاری امنیتی را پشتیبانی می‌کند.

هشدار صادقانه: این یک پلتفرم مرجع است نه سیلیکون عرضه‌شده — فرکانس، توان، قیمت و رشتهٔ ISA منتشر نشده‌اند و ارقام ۱۶× و ۱۰۰ps ادعای سازنده‌اند بدون بنچمارک مستقل. موتور برداری ARC VPX آی‌پی DSP (خط ARC شرکت Synopsys) است و RISC-V نیست.